Frequently Asked Questions

How do MaxxMacro circle holders compare with older System 3R electrode holders for graphite machining?

Circular and pocket holders suit different electrode geometries, so compare mounting support and machining access rather than assuming a universal material saving...

How do the dowel holes in MaxxMacro cast and Performance Pallets differ?

MaxxMacro cast pallet holes need finishing for precision location, while Performance Pallets provide finished dowel holes in the applicable size...

Do Maxx-ER centering plate feet need to be ground after installation?

Separate Maxx-ER centering plates and feet may require finish grinding after installation, while complete finished holder assemblies are prepared for use...

How do the Unclamp, Z-Clean, and Turbo Lock ports on a pneumatic chuck work?

Pneumatic chucks use Unclamp for release, Z-Clean for cleaning and seating checks, and optional Turbo Lock for added holding force...

Does MaxxTooling offer products compatible with System 3R Mini and Junior systems?

MaxxTooling does not offer System 3R Mini or Junior chucks, but the MaxxMacro 54 range may suit a compact setup...

Do ER collet chucks include an adjustable stop for workpiece depth?

ER collet chuck depth stops are fixed, although a suitable spacer arrangement can provide a different contact height...

What repeatability tolerance do MaxxTooling manual chucks achieve?

MaxxTooling manual chucks have a stated repeatability of 2 microns, which differs from the dimensional tolerance of individual product features...

Can MaxxTooling chucks operate under temperature fluctuations?

MaxxTooling chucks have operated under temperature changes, but a general tested temperature range is not specified for every setup...

Are MaxxTooling workholding products magnetic?

Many MaxxTooling products are magnetic because of their stainless steel grade, so check the particular material when magnetism matters...

What determines the load capacity of a MaxxMacro chuck mounted horizontally?

Horizontal MaxxMacro chuck capacity depends on geometry and loading, with 7 kg given as a general guideline requiring setup confirmation...

How do plated and unplated pallets differ in coating coverage and corrosion resistance?

Plated pallets protect non-mating surfaces with a coating, while Performance Pallets use corrosion-resistant material without relying on plating...

Where can I find the recommended tightening torque for a MaxxTooling chuck?

Find the recommended tightening torque on your specific MaxxTooling chuck’s product page rather than applying a universal value...

Can I buy a MaxxTooling holder without its pallet?

A holder without its pallet can be quoted, but the additional manufacturing or disassembly work usually limits the saving...

What are the dowel-hole center tolerances of MaxxMacro 54 and 70 Performance Pallets?

MaxxMacro 54 and 70 Performance Pallet dowel holes have a stated center tolerance of ±0.005 mm relative to the chuck datum...

Does MaxxTooling sell ER collet sets?

MaxxTooling does not sell ER collet sets, although its collet chucks accept appropriately sized standard collets from other suppliers...

Is an ER collet included with a MaxxTooling collet chuck?

A placeholder ER collet is included with the chuck, but production requires your own correctly sized collet...

Can I order a MaxxMacro probe with a 2 mm ball tip and a straight shank?

A MaxxMacro probe with a 2 mm ball tip can be custom quoted, but a straight-shank version is not available...

Can I buy Maxx-ER centering plates without the support feet?

Maxx-ER centering plates are supplied as complete sets with support feet and are not offered at a reduced price without them...

Are MaxxMacro holders compatible with larger chucks?

MaxxMacro holders support the intended smaller-to-larger chuck compatibility, while larger pallets on smaller chucks are not recommended...

How do MaxxTooling stationary probes detect position in EDM applications?

MaxxTooling stationary probes detect workpiece position through direct electrical contact and require alignment before EDM measurement...

Why are jack screws needed to align a chuck during installation?

Jack screws allow fine adjustment during chuck alignment so the setup can be leveled and indicated relative to the spindle...

Are the mounting holes in a chuck base precision-fit for tube dowels?

Chuck base mounting holes are not precision-fit locating holes for tube dowels unless the specific base is prepared accordingly...

How do I center a tool, holder, or custom fixture on a MaxxTooling Performance Pallet?

Center a fixture on a Performance Pallet using its finished dowel holes or by indicating and adjusting the mounted assembly...

What is required to seal a collet chuck for through-flushing?

A coolant-sealed ER collet and the appropriate drawbar O-ring provide the sealed fluid path required for through-flushing...

Do MaxxTooling collet chucks support through-flushing?

MaxxTooling collet chucks support through-flushing when the complete assembly uses the appropriate collet and seals...

How do I equip an EDM machine with a MaxxMacro workholding system?

Equip an EDM machine with a MaxxMacro chuck and mounting arrangement that match its interfaces and required C-axis functionality...

What air flow rate do MaxxTooling pneumatic chucks require?

MaxxTooling does not specify a general air flow requirement, so pneumatic chuck operation should follow the exact model’s pressure instructions...

Are MaxxTooling holders mounted on pallets using dowel pins?

MaxxTooling holders are aligned and secured during manufacturing, rather than located on their supplied pallets with dowel pins...

Maxx Tooling