How can I prevent the locating tabs on MaxxMacro 54 and MaxxMacro 70 pallets from breaking?

Locating tabs can break if a pallet is dropped, placed at an angle, or twisted into engagement with the chuck. The risk is greater when handling large fixtures.

To prevent damage:

1. Fully retract the locking screw before changing the pallet on a manual chuck.
2. Lower the pallet squarely and level onto the chuck, without dropping or striking it.
3. Make sure the tabs engage the locators and the pallet is seated flat.
4. Clamp only after the pallet is correctly seated. Do not twist it into position while actuating the chuck.